Self-sealing bags are widely used in our life. Self-sealing bags provide many conveniences for many small centers in our life. Self-sealing bags can be used in many ways. Nowadays, many self-sealing bags will be used after inflating. Next, there are many precautions for plastic self-sealing bags before and after inflating.
First of all, before and after inflating, we should pay attention not to let sharp objects scratch. It is better to stop operating on the bed or on a clean desktop. If there are buttons and zippers in the stored items, they should be folded in the inside and put into the treasure bag. Clothes, quilts and other items should be placed in self-sealing bags as far as possible, at least 3-5 cm away from the zipper, and large items should not be forced into. To ensure that the sealing zipper is partially clean, if fibers and dust enter, the sealing performance will be reduced. Plastic self-sealing bags propose to wipe the zipper clean with water-soaked gauze before closing the zipper. After closing the zipper, please hold the slider by hand and pull it back and forth several times to ensure that the two ribs of the seal are fully buckled into the groove to ensure the sealing effect. After pumping, please check the seal again and make sure it is not sealed. When using the suction pump, the screw joint of the pump is rotated to the end to resist the white rubber sealing gasket of the suction port, so as to ensure that there is no air leakage at the interface. A large self-sealing bag needs to be sucked for 3 to 5 minutes, and the plastic self-sealing bag needs to be sucked for about 300 or 500 times before it has obvious flattening phenomenon. In the use of pumps, pay attention to continuous pumping, it is best not to stop. It's best to have a vacuum cleaner at home, which is labor-saving and convenient. In the cabinet or other central storage, we also need to pay attention to the storage location of sharp objects, to ensure that self-sealing bags are complete.